TYGRIS CLEAR LACQUER AEROSOL SPRAY PAINT 400ML ACRYLIC

A clear acrylic lacquer aerosol spray in a 400ml can, formulated as a fast-drying protective coating for electronics, metal, wood and paper documents. It forms a smooth, transparent, touch- and scratch-resistant film with good durability, offering resistance to mild acids, alkalis and general weathering, including sunlight, water and salt spray. Application is straightforward: shake well, spray upright from 25–30cm, allow 15–30 minutes to dry and 20 minutes between coats, then invert the can to clear the actuator. Always test previously coated surfaces for compatibility, consult the safety data sheet, wear suitable PPE, and dispose of used aerosols in line with local and national regulations.

Features

• Fast drying

• Excellent resistance to weathering and sunlight

• High resistance to mild acids and alkalis

• Touch and scratch resistant finish

• Good resistance to water and salt spray

• Forms a smooth, transparent film with good durability and toughness

• Suitable for sealing and protecting electronics, metal, wood and paper documents

• Application guidance: shake well; spray upright from 25–30cm; allow 15–30 minutes to dry; 20 minutes between coats; invert can after use to clear actuator

• Safety guidance: consult safety data sheet; wear suitable PPE; test previously coated surfaces for compatibility; dispose of aerosols according to regulations

Specifications

• Type: Acrylic lacquer

• Volume: 400ml

• Appearance: Clear slightly viscous liquid

• Odour: Solvent

• Contents: Blend of acrylic copolymer, adhesion promoter and ultraviolet absorber in acetone, 2-butoxyethanol, 2-methoxy-1-methyl-ethyl acetate in butane/propane propellant

• Flash point: -0°C

• Relative density: 0.885

• Solubility: Insoluble in water

• Flammability: Extremely flammable

• Storage: Below 50°C