FLYWHEEL PULLER M26 x 1.00 RH, KTM BETA 580.12.009.000, 58012009000 36.25173.000

Flywheel Puller 26mm x 1.0 mm Right Hand External Female.

KTM 1988 to current motorcycles: 250, 400, 450, 525 4 stroke EXC, XC, SX, SMC.

Husqvarna 250, 450, 510 4 stroke TE, TC, SM, SMR.

Also can be used to remove clutches from small frame Vespa scooters.

KTM

• 250 SXF 05-10
• 250 XC 08-11
• 250 XCF 07-09
• 250 XCFW 07-11
• 250 XCW 08-11
• 400 EXC 98-02
• 400 EXCG 04-06
• 400 MXC 01-02
• 400 SX 98-02
• 400 XCW 07-08
• 450 EXCG 03- 06
• 450 EXCR 07-08
• 450 MXCG 03-05
• 450 SMR 2008
• 450 SXF 03-11
• 450 XC 2007
• 450 XCF 08-09
• 450 XCW/XCRW 07- 09
• 505 XCF 08-09
• 520EXC/MXC/SX 00-02
• 525 EXC 03-07
• 525 MXCG 03-05
• 530 EXC 10-11
• 530 EXCR 2008
• 530 XCRW 2008

BETA

• RR & RS 4 Stroke 2005-2024
• RR & Xtrainer 2013-2024

Tips on use.
- Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
- Use copper grease on the puller threads, for long life.
- Make sure the puller is fully screwed into the flywheel.
- After tightening use a hammer on the centre and tap to jolt free [not always need].
- If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.