Crankshaft Mounting Tool KTM

SPECIAL CRANKSHAFT MOUNTING TOOL KTM.

- FITS KTM 300/250 SX, MXC, EXC, EGS
- Crankshaft mounting tool Specifically designed for KTM crankshaft assembly..
- Fits crankshaft smoothly without damage to crankshaft or bearings.
- Overall length of tool is 146mm and constructed from carbon steel.
- Fitting face is O.D. 70mm x I.D. 43.5mm / 3.5mm depth.
- Long bolt end is Dia. M12 x 1.25mm with drive hole.
- This is a quality motorcycle part supplied by 2Bros MCS Ltd.

Part No. 00-8100

Instructions.
Sometimes the final assembly is done with a cold crankcase and a puller tool. This tool uses a long nut / stud to connect to the crankshaft end and a thick tube that allows you to pull the crankshaft through the main bearing without damage. By only pushing on the inner bearing race no damage to bearings will occur. Assembly is the same only you don't heat the crankcase. You pull the crankshaft through the bearing and this slides the two crankcases together.